www.eaton.com/ePDU6 5 4www.eaton.com/ePDUINSTALLATIONI0I0I==SPK0142.5 mm2.1 mm 2.3 mm2.5 mm2.3 mm2.1 mmX 2SPK0133INSTALLATIONEaton® ePDU® G3Installation and Connectivity Quick StartEnglishUnplug the ePDU during installation. Read and understand the safety manual before installation. Read and understand the operator's manual before using this equipment.- or -

Eaton ePDU G3 Installation, Quick Start

INTRODUCTION

Checking the LCD Panel for Notifications

Checking Outlet Indicators for Status

Checking the Web Interface for Notifications

Checking for E-mail Notifications with History Reports

Resolving Problems

Contacting Service and Support

SAFETY WARNINGS

TROUBLESHOOTING

Chassis and Installation

LCD Operation

COM Ports

ePDU Web Interface Alarms and Events

Type Code 2 or 3 (Eaton ePDU or User)

Error Messages

Accessories

WARRANTY

ePDU G3

Product Specifications

LCD Interface

Circuit Breakers

Input Power Cord

Features

Configurability and Security

INSTALLATION

Inspecting the Equipment

Optional Accessories

Installation Overview

Power Feed Labels

Mounting Buttons

IEC Outlet Grip Plug Retention Mechanism

Installing Vertical ePDUs in a Rack Cabinet

Using Mounting Buttons Installed on Clip Feet

Using Clip Feet and Cage Nuts on a Square-hole Rack

Installing the Horizontal Models in a Rack Cabinet

Grounding the ePDU

Network and Environmental Ports

Connecting to a LAN Ethernet Port

Connecting Optional Environmental Monitoring Probe Equipment

Connecting the Output Devices

Operating the ePDU

OPERATION OVERVIEW

Remote Operation Interfaces

Outlets and Circuit Breakers

Operation Concepts

Shutting Down the ePDU

NETWORK COMMUNICATION CONFIGURATION

LCD— Static IP address

Serial connection — Static IP address

Verify Web Operation After Configuration

LCD INTERFACE OPERATION

Operation Mode

Password Protected Menus

Active Alarms Menu

Alarms History Menu

Sections Submenu

Environment Submenu

Control Menu

USB Flash Mode Submenu

Display Submenu

Daisy Chain Submenu

IPv4 Submenu

ePDU Info Menu

SERIAL INTERFACE OPERATION

command

info command

quit command

get command

set command

pdu command

XML Object Tables

WEB INTERFACE OPERATION

Languages

Accessing the Web Interface

Power Management

Settings

Local or Remote Administrator

ePDU-User

Outlet-User

Session Management

Groups

Outlets

Environment

Active Alarms

Logs

Syslog

Access Accounts

Configure the LCD Password

Configure Remote Group Access

User-Defined Group Definition

Enable/Disable Firmware Upgrade

Perform Firmware Upgrade

Date &Time

TCP/IP

Configure the IPv4 Settings

Configure the DNS

SNMP

Access Eaton ePDU MIB Objects (Privileged Access Only)

Enable/Disable the Telnet Interface

Set LDAP Search Configuration

Set LDAP Server Global Parameters

Modify LDAP Server Settings

Add RADIUS Server

MAINTENANCE AND ALARMS

Reboot the eNMC Module and Reset the ePDU

Upgrading the Firmware with FTP Protocol

Upgrading the Firmware with the USB Port

Defining the Alarm or Event Condition

SERVICE AND SUPPORT

Power Outlets

Optional Environmental Monitoring Probe

Brackets for Cisco Racks (US only)

Chassis Hole Pattern (EMEA models only)

Using Mounting Brackets for Cisco Racks (US only)

Logs & Notifications

Access Privileges

Overview

Power Schedule

Trap Notification

Configure Local User Access

Configure an Outlet for a User-Defined Outlet Group

Security

Authenticate LDAP Remote User

Restarting the eNMC Module and Resetting the ePDU

Upgrading Firmware with Hypertext Transfer Protocol