FATEK P5102S Installation Manual
Also see for P5102N: Connection manual
        |
Thank you for purchasing FATEK HMI. Before installing or operating the unit, pleaseread this installation guide carefully to ensure correct use.1. Safety Precautions (Read these precautions before use.)1.1 Generalz Unpack and check the delivery for transportation damage. If any damage ordeformation is found, please notify the supplier.z The supplier is not responsible for the disassembled, altered or modifieddevice.z Never allow fluid or any conductive particles to enter into the HMI.Otherwise, it may damage the HMI, cause fire or malfunction.z Only qualified personnel may install the HMI, perform maintenance andinspection.z The liquid crystal inside the LCD panel is a hazardous substance. If thepanel is damaged, avoid contact with the leaked liquid crystal. If the liquidcrystal spills on clothing or skin, use soap and wash off thoroughly. In caseof eye contact the liquid, hold the eye open, flush with plenty water and getmedical attention as soon as possible.z Do not touch any terminals while the power is on. Otherwise, it may causeinjury due to electrical shock.z Disconnect the power supply before installing the HMI, do wiring operation,perform maintenance or inspection. Otherwise, it may cause damage orelectrical shock.1.2 Installationz The installation may be carried out by qualified personnel only.z Install the HMI according to the installation procedures.z Check the power source voltage is within the specified range and thepolarity is correct before connecting the HMI.z Keep signal and power supply cables away from high-voltage, large-currentcarrying cables.P5102S/N/N1 HMI Installation Guide1R |
Related manuals for FATEK P5102N
manualsdatabase
Your AI-powered manual search engine