Factor IR-KIT-36K Installation Instructions Manual
   | |
Contents | 
IR-KIT-36/56K Repeater SystemThank you for purchasing the Factor Electronics IR-KIT-36/56K which can beused to controlling up to 8 IR-controllable A/V devices behind using yourexisting IR remote controls.SYSTEM CONTENTS:(1) IR-CONN-BLKIR CONNECTION BOX …………….…………………………………………………….1PC(2)IR-REP-36/56KDual-band IR RECEIVER……………………………………………………………..…1PC(3) IR-2-FLASHDUAL IR blinking emitter …………………………………..…………………….……2PCS(4) IR-PWR-12V/50012V/500mA switching power ……….……………….…….…………………….….1PCINSTALLATION DIAGRAM & MOUNTING INSTRUCTIONS:MOUNTING INSTRUCTION(Refer to the installation diagram): Mount the IR-CONN-BLK IR connecting box behind AV devices and near an ACoutlet. Connect the IR receiver IR-REP-36/56K to the IR-CONN-BLK connecting box.Position the IR receivers in a location which is “line of sight” to your IR remotecontrols. Plug the IR-2-FLASH emitters into the IR-CONN-BLK connecting box andattach the emitter directly on top of the component’s IR sensors. The IR-PWR-12V/500 power DC adaptor plugs into a voltage compliant ACoutlet and connects to the “POWER” receptacle of the IR-CONN-BLKconnecting box. Make sure the POWER LED indicator is “ON green” to confirmThe unit is ready for operation.INSTALLATION DIAGRAMCD PLAYER 1 CD PLAYER 2 DVD PLAYER 1LR1 2 3IR RECEIVERSPEAKERSTERMINAL BLOCKIRV+GRPTPWS124REMOTEDC 12VPow er Am p lifierV+ ：With SOLID STRIPEMARKING in GREYG：No any markingIR：With DASHMARKING in GREYV+ ：With SOLID STRIPEMARKING in GREYG：No any markingIR：With DASHMARKING in GREYBACK VIEWFOR THE CODING & DEFINITIONEMITTER_Dual33 EMITTER_DualIR WINDOWNOTE: If a power supply is not connected to the status power receptacle on theIR-CONN-BLK connecting box, the status LED’s will not function. The statuspower adaptor is not included in this kit. However the IR will function. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine