Fantec MM-HDRL Installation Manual
Also see for MM-HDRL: User manual
  |
www.fantec.deENGLISH: First StepsWhen you use the player the first time, connect it to the TV with the AV-cable first!The device will initialize, when you turn on the power and after a minute it will change to standby.To turn on the device press the power-button.The HDD have to be formatted first!- for this purpose open the setup-menu by pressing the setup-button- choose the tab “system”- open the option “hdd format”- select hdd-format from the menu and an assistant, which helps you to format the hdd, starts- A warning will be shown. Select “ok” for verificationStep 1:In this menu you can choose, how many space on your hdd you want to reserve for the time shiftfunction. One hour time shift uses 4 GB space on your hdd. You can use time shift for 4 hours atmaximum that is equal to 16GB space on your hdd.How many space you should reserve, depends on how often and long you want to use the timeshift function and the available space on your hdd. Default is one hour.Use the navigation buttons and to select the size.Select “ok” to get to the next step.Step 2:In this menu you can choose the size of the record- and multimedia partition. If you want torecord films very often, increase the record partition.Please note that you can not access on the record and time shift partition directly via USBfrom your windows pc. But you can copy the files on your multimedia partition every time. Afterthis you can access the data from your pc.Use the navigation buttons and to select the size.Select “ok” to get to the next step.Step 3:Now you can select how the multimedia partition is parted. You can split the space between aFat32 and a NTFS partition. You can access both partitions from your PC.Indeed the player is only able to read data from the NTFS partition. Writing on this partition is notpossible. The player can only write on the fat32 partition. (This limitation only applies to TV use)Use the navigation buttons and to select the size.Select “ok” to get to the next step.Select “ok” when the warning appears and the hdd will be formated.This will take a while.After the hdd has been formatted, the player restarts and is now ready to use. |
Related manuals for Fantec MM-HDRL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine