Fantech SHR series Installation, Operation And Maintenance Manual

Also see for SHR series: Installation manual Installation manual Operation manual

Contents

Fantech SHR series Installation, Operation And Maintenance Manual Manual pdf 1 page image

1SHR & VHR ModelsINSTALLATION, OPERATION AND MAINTENANCE MANUALSHR 1504 • SHR 1505 R(D) • SHR 2004 • SHR 2005 R(D) • SHR 3005 R • SHR 3205RDVHR 1404 • VHR 1405 R • VHR 2004 • VHR 2005 RYour ventilation system should be installed in conformance with the appropriate provincial or state requirementsor in the absence of such requirements with the current edition of the National Building Code, and / orASHRAE’s “ Good Engineering Practices”.IMPORTANT - PLEASE READ THIS MANUALBEFORE INSTALLING UNITCAUTION - Before installation, careful consideration must be given to how this systemwill operate if connected to any other piece of mechanical equipment, i.e. a forced air furnaceor air handler, operating at a higher static. After installation, the compatibility of the twopieces of equipment must be confirmed by measuring the airflow’s of the Heat Recovery orEnergy Recovery Ventilators by using the balancing procedure found in this manual.It is always important to assess how the operation of any HRV/ERV may interact with ventedcombustion equipment (i.e. Gas Furnaces, Oil Furnaces, Wood Stoves, etc.).NEVER - install a ventilator in a situation where its normal operation, lack of operation orpartial failure may result in the backdrafting or improper functioning of vented combustionequipment!!!SHR & VHR SeriesHeat Recovery Ventilator