USING THE VACUUM CLEANEREDGE CLEANINGThis vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edgesnear baseboards and stationary furniture.712RUG/FLOOR (TOOLS)SELECTORThe RUG/FLOOR(TOOLS)selector should only beadjusted while the vacuum cleaner is turned onand in the upright position.When cleaning a rug or carpet,firstturn the ON/OFF switch to the ONposition,and then set the RUG/FLOOR(TOOLS)selector to theRUG position.When cleaning a bare floor or when usingone of the attachments,set the RUG/FLOOR(TOOLS)selector to the FLOOR position.Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuumcleaner is turned off.Rug/Floor (Tools)SELECTORRUG FLOOR(TOOLS)RUGNozzle HeadHeight Adjustment LeverHEIGHT ADJUSTMENT LEVERThe nozzle head can beadjusted to four differentheight settings.Set the height adjustment to theappropriate carpet length.rdUse the 3 ( )heightsetting.TURN OFF BRUSH ROLLWHEN USING TOOLS.Before using the height adj-ustment lever, please makesure the nozzle head is tiltedbackward from the floor.Caution: