GE DNCD450EG Dimensions And Installation Information

Also see for DNCD450EG: Installation instructions

GE DNCD450EG Dimensions And Installation Information Manual pdf 1 page image

Dimensions and Installation Information (in inches)DNCD450EG/GGGE® Super 7.0 Cu. Ft. Capacity Commercial DryerFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.Listed byUnderwritersLaboratories370408Specification Revised 5/09Exhaust Options:Electric: 4-way via rear, right, left and bottom. Maximum recom-mended exhaust duct length is 45 feet of 4" rigid ducting with two90° elbows and a 4" dampered wall cap.Gas: When viewed from the front of the unit, exhaust 3-way via rear,left and bottom. Maximum recommended exhaust duct length is 15feet of 4" rigidducting with two 90° elbows and a 4" dampered wall cap.Circuit Requirements:An individual, properly-grounded branch circuit, protected by a 30-amp circuit breaker or a time-delay fuse, is required.Electric Dryer Rating:208/240V, 5600W, 24A, 60Hz208V, 4400W, 22A, 60HzNote: Dryer wall outlet must be located within 36" of service cordentry and accessible when dryer is mounted in position.Installation Information: For complete information, see installationinstructions packed with your dryer.3625-1/24251Side View27Rear View36 42272 3-1/22-1/225-1/2*Side View Rear View8-1/228-1/423-1/211-1/2*24-1/2" from the edge of the side panel to the front.25-1/2" from front to edge of endcaps.Washer/Dryers SC QSart

/ 3

Related manuals for GE DNCD450EG