GE JBP23SRSS Dimensions And Installation Information

GE JBP23SRSS Dimensions And Installation Information Manual pdf 1 page image

Dimensions and Installation Information (in inches)Listed byUnderwritersLaboratoriesAll GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atgeappliances.com or call GE Answer Center® service,800.626.2000.JBP23SRGE® 30" Free-Standing Electric RangeSpecification Created 8/10 322020KW Rating240V 11.7208V 8.8Breaker Size40 Amps †302529-7/846-7/82-1/27-1/225-3/847-5/82-1/2Acceptable electricaloutlet area30_install_fse_ge.epsDimension from wall to front ofclosed oven door handle is 27-3/4302529-7/846-7/82-1/27-1/225-3/847-5/82-1/2Acceptable electricaloutlet area30_install_fse_ge.epsDimension from wall to front ofclosed oven door handle is 27-3/4.†Note: Check local codes for required breaker size.Effective January 1, 1996, the National ElectricalCode requires that new construction (not existing)utilize a 4-conductor connection to an electric range.Receptacle Locations: Locally approved flexibleservice cord or conduit must be used becauseterminals are not accessible after range installation.See shaded area in drawing for location of electricaloutlet box. Recommended outlet locations allowrange to be installed directly against wall.Note: 30" ranges conform to U.L. requirements for0" spacing from adjacent walls below countertops.To reduce possibility of scorching walls, engineeringrecommends a minimum of 1-1/2" spacing to allowfor possible extended, high-heat, no-load heatingelement operation.Installation information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.All 30" GE gas and electric range backguardsare 30-7/8" wide.*Note: 30" ranges conform to U.L. requirementsfor 0" spacing from adjacent walls belowcountertops. To reduce possible scorching ofwalls, engineering recommends a minimum of1-1/2" spacing to allow for possible extended,high heat, no-load heating element operation.*Except these models: JGBS07, JGBS04, all GEProfile free-standing electric and gas rangesFits most countertop backsplash applications.Consult Use & Care Manual for detailedinstallation instructions.30-7/8"

/ 2

Related manuals for GE JBP23SR