Specification Revised 9/04321570GE AppliancesJBP84TH/WH/KH/CH/BH – GE® 30" Free-Standing Electric Convection RangeDimensions and Installation Information (in inches)*Dimension from wall to front of closed door handle is 27-3/8".†Note: Check local codes for required breaker size.Effective January 1, 1996, the National Electrical Code requires that new construction (not existing)utilize a 4-conductor connection to an electric range.Receptacle LocationsLocally approved flexible service cord or conduit must be used because terminals are not accessibleafter range installation. See shaded area in drawing for location of electrical outlet box.Recommended outlet locations allow range to be installed directly against wall.Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops. To reducepossibility of scorching walls, it is recommended a minimum of 1-1/2" spacing be allowed fromadjacent side walls to allow for possible extended, high-heat, no-load heating element operation.Installation Information: Before installing, consult installation instructions packed with productfor current dimensional data.30252-1/27-1/229-7/825-3/8*47-5/846-7/82-1/2Acceptable electricaloutlet areaPreferred electricaloutlet areaRoughed-in dimensionsElectrical outlet locat ABC.epsKW RatingKW RatingKW240V 12.4208V 9.3Breaker Size40 Amps†For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range. RListed byUnderwritersLaboratories