GE JGSP28CEK Dimensions And Installation Information

Also see for JGSP28BEK: Dimensions and installation information

GE JGSP28CEK Dimensions And Installation Information Manual pdf 1 page image

All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range. RListed byUnderwritersLaboratoriesDimension and installation information are shown in inches.JGSP28WEK/CEK/BEKGE® 30" Slide-In Gas RangeDimensions and Installation InformationSpecification Created 11/04330228Models are shipped with color-matched Rear Filler Strip Kit.Optional Kits For Slide-InElectric Ranges(Available at additional cost)Lower/Side Trim Kits Accessory BackguardsJXS56 - Lower Trim Kit JXS37 - BackguardJXS86 - Vertical Side Trim Kit JXS77 - Body SidesNote: To reduce possiblity of scorching of the side walladjacent to the heating elements, it isrecommended a minimum of 6” spacing fromadjacent side walls be allowed for possible extended,high-heat, no-load operation of heating elements.Receptacle Location: For all 30” Slide-In Ranges locallyapproved flexible service cord or conduit must beused because terminals are not accessible after rangeinstallation. See shaded area in drawing for location ofelectrical outlet box. Recommended outlet locationsallow range to be installed directly against rear wall.Note: Cabinets installed adjacent to slide-in rangesmust have an adhesion spec of at least 194°.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.KW Rating240V 10.8208V 8.1For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.If you are NOT using theoptional Filler or Backguard:23-3/1630If you are using the optionalFiller or Backguard:2530

/ 2

Related manuals for GE JGSP28BEK