GE JKP55DP Dimensions And Installation Information

Also see for JKP55DP: Installation instructions

GE JKP55DP Dimensions And Installation Information Manual pdf 1 page image

JKP55DPGE® 27" Built-In Double Wall OvenFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Created 5/09 320369Note: Cabinets installed adjacent to wall ovens must havean adhesion spec of at least a 194°F temperature rating.Note: If marks, blemishes or the cutout opening is visibleabove the installed oven, it may be necessary to addwood shims under the runners and front trim until themarks or openings are covered.Note: Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90° wallsshould be placed to avoid interference with the handle.KW Rating240V 6.8208V 5.1Breaker Size240V 30 Amps208V 30 AmpsElectric wall ovens are not approved for installationwith a plug and receptacle. They must be hard wired inaccordance with installation instructions.CabinetA – Cabinet wB – MinimumC – OpeningD – OpeningE – RecommOvenF – Overall dG – Overall hOverall hH – Overall w*Depth includiSuitabbracinto supporunne10Locatejunction boxfor 27"modelseither 5" MIN.below cutoutfloor or 44"MIN. abovecutout floorAccessfromadjacentcabinetrequiredAllow 3/4"for overlapover all edgesof cutoutAMinimumcutout locationfrom floorDE2" X 4" orequiv. runners(cutout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21Cabinet 27"A – Cabinet width required 27" min.B – Minimum cabinet depth 23-5/8"C – Opening width 25" min. - 25-1/4" maxD – Opening height 50-1/8" maxE – Recommended minimum cutout location from floor 13-1/4"OvenF – Overall depth* 23-5/8"G – Overall height with trim 51-7/8" - 52-3/4"Overall height without trim 51"H – Overall width 26-5/8"*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.CLSuitablebracingto supportrunners 18"Over centerlineof cabinet(must support 300 lbs.)2" x 4" orequivalentrunners10Allow 3/4"for overlapover all edgesof cutoutAX 4" oruiv. runnerstout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21Dimensions and Installation Information (in inches)

/ 2

Related manuals for GE JKP55DP