GE JKP90SP Dimensions And Installation Information

GE JKP90SP Dimensions And Installation Information Manual pdf 1 page image

Dimensions and Installation Information (in inches)Listed byUnderwritersLaboratoriesAll GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.CabinetA – CaB – MC – OpD – OpE – MOvenF – OvG – OvOvH – Ov*Depth26-8/10Suibrato suprunEMinimumcutout locationfrom floorAllow minimum of21" for clearanceto adjacent corners,drawers, walls, etc.212" X 4" orequiv. runnersConduit(48-1/2"long)Allow 3/4" for overlapof oven over alledges of cutout10ADRecommendedjunction boxlocations.Locate junctionbox either 5" MIN.below cutoutfloor or 48" MIN.above cutoutfloorCBFGHAccessfromadjacentcabinetrequiredSpecification Created 5/09 320359Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Note: if marks, blemishes or the cutout opening isvisible above the installed oven, it may be necessaryto add wood shims under the runners and front trimuntil the marks or openings are covered.Note: Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90° wallsshould be placed to avoid interference with the handle.Electric wall ovens are not approved for installationwith a plug and receptacle. They must be hard wiredin accordance with installation instructions.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.Note: These ovens are not approved for stackable orside-by-side installations.JKP90SPGE® 27" Built-In Double Microwave/Thermal Wall OvenKW Rating240V 6.4208V 4.8Breaker Size240V 30 Amps208V 30 AmpsCabinet 27"A – Cabinet width required 27" min.B – Minimum cabinet depth 23-5/8"C – Opening width 25" min. - 25-1/4" maxD – Opening height 41-1/4" maxE – Minimum cutout location from floor 22"OvenF – Overall depth* 23-5/8"G – Overall height with trim 43" - 43-7/8"Overall height without trim 42-1/8"H – Overall width 26-5/8"*Depth including door handle is approximately 26-7/10" min. to26-8/10" max.CL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners18"over centerlineof cabinet(must support 275 lbs.)EionAllow minimum of21" for clearanceto adjacent corners,drawers, walls, etc.212" X 4" orequiv. runnersConduit(48-1/2"long)Allow 3/4" for overlapof oven over alledges of cutout10ADCBFGH

/ 2

Related manuals for GE JKP90SP