GE JTP75BM Dimensions And Installation Information

Also see for JTP75BM: Installation instructions Brochure

GE JTP75BM Dimensions And Installation Information Manual pdf 1 page image

JTP75BM/CM/WMGE® 30" Built-In Convection/Thermal Wall OvenFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Created 1/07 320148KW Rating240V 9.0208V 6.8Breaker Size240V 40 Amps208V 40 Amps21" minimumDoor OpeningAllowanceBBAACutout height51-13/16" MIN.51-15/16" MAX.Minimum cutout location12" from the floor.Cutout depth23-1/2" MIN547" tobottom ofjunction boxCutout width28-1/2'' MIN.28-5/8'' MAX.21Cabinetwidth 30"CEDMOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.Conduit(72"long)Junction boxlocationSuitablebracingto supportrunnersCabinetA – Overlap oB – Overlap oOvenC – Overall deD – Overall heOverall heE – Overall wi*Depth includin26-9/10" max.Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Note: If marks, blemishes or the cutout opening isvisible above the installed oven, it may be necessaryto add wood shims under the runners and front trimuntil the marks or openings are covered.Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls should beplaced to avoid interference with the handle.Installation Information: Before installing, consultinstallation instructions packed with product for currentdimensional data.Electric wall ovens are not approved for installationwith a plug and receptacle. They must be hard wired inaccordance with installation instructions.BBAACutout height51-13/16" MIN.51-15/16" MAX.Minimum cutout location12" from the floor.Cutout depth23-1/2" MIN547" tobottom ofjunction boxCutout width28-1/2'' MIN.28-5/8'' MAX.21Cabinetwidth 30"CDBINETS CAN BE USED WITH THIS UNIT.INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.Conduit(72"long)Junction boxlocationCL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 325 lbs.)Cabinet 30"A – Overlap of oven over side of edges of cutout 11/16"-3/4"B – Overlap of oven at top and bottom of cutout 1"OvenC – Overall depth* 23-1/2"D – Overall height with trim 53-3/8"Overall height without trim 52-7/8"E – Overall width 29-3/4"*Depth including door handle is approximately 26-6/10" min. to26-9/10" max.Dimensions and Installation Information (in inches)

/ 2

Related manuals for GE JTP75BM