Listed byUnderwritersLaboratoriesSpecification Revised 12/15For answers to your Monogram,® GE Profile™or GE ® appliance questions, visit our websiteat geappliances.com or call GE Answer Center ®service, 800.626.2000.30" models require a 30"-wide opening*The supplied duct cover fits 7'-4" to 9'-0" ceiling heights(10' with optional high ceiling kit JXDC72)The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing thehood more than 38" above the cooking surface is not recommended. The hood installation height above thecooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running fromthe top of the hood to the ceiling.NOTE: Installation height should be measured from the cooking surface to the lowest partof the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installedJVW5301SJ_EJ24" Min7"8-1/2"18-1/2" 30"*HeighttoCeiling9-3/4"30" models require a 30"-wide opening*The supplied duct cover fits 7'-4" to 9'-0" ceiling heights(10' with optional high ceiling kit JXDC72)The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing thehood more than 38" above the cooking surface is not recommended. The hood installation height above thecooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running fromthe top of the hood to the ceiling.NOTE: Installation height should be measured from the cooking surface to the lowest partof the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installedfor recirculating operation. Parts for recirculating operation are supplied with the hood. However, wheninstalled for recirculating operation, the optional charcoal Filter JXCF72 will need to be purchased separately.JVW5301SJ_EJ24" Min7"8-1/2"18-1/2" 30"*HeighttoCeiling9-3/4"InstallatIon InformatIon:Before installing, consult Use & Care/installation instructionspacked with product for current dimensional data.optIonal accessorIesJXDC72SS/ES-10(ft.) Ceiling Duct Cover KitMax ceiling height installation with kit - 10'-0"JXRC70-Remote ControlJXCF72-Charcoal Filter(needed if used in recirculation mode)Amp Rating120V 2.5JVW5301sJ/eJGE® 30" Wall-Mount Pyramid Chimney HoodDImensIons anD InstallatIon InformatIon (In Inches)30" Models Require a 30"-Wide Opening*The supplied duct cover fits 7'-4" to 8'-10" ceilingheights (10" with optional high ceiling kit JXDC72)The vent hood must be installed 24" min. and 36" max. above the cooking surface.The hood installation height above the cooking surface depends upon ceiling height.The telescopic duct cover conceals the ductwork running from the top of the hood tothe ceiling.NOTE: Installation height should be measured from the cooking surface to the low-est part of the hood. This hood may be installed onto a wall and vented to the out-doors, or it can be installed for recirculating operation. Parts for recirculating opera-tion are supplied with the hood. However, when installed for recirculating operation,the optional charcoal filter JXCF72 will need to be purchased separately.