GE JX2127SH Installation Instructions Manual

Also see for JX2127: Installation instructions Installation instructions

Contents

GE JX2127SH Installation Instructions Manual Manual pdf 1 page image

PART QUANTITYTrim Frame 1Bottom Duct 1Top Bracket 1Phillips Round-Head 24Screws (22 requiredfor installation)Phillips Flat-Head 5Screws (4 required forinstallation)Anti-Tip Bracket 1Bottom Bracket 1Template 1PARTS INCLUDEDQuestions? Call GE Answer Center at 800.626.2000 or Visit our Website at: www.GEAppliances.comREAD CAREFULLY.KEEP THESE INSTRUCTIONS.Installation Built-In Trim KitsInstructions JX2127 and JX2130Read these instructions completely and carefully.• IMPORTANT – Save theseinstructions for local inspector’s use.• IMPORTANT – Observe allgoverning codes and ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep these instructionsfor future reference.• For easier installation and personal safety, werecommend that two people install this microwave oven.• Unplug the microwave oven before attemptinginstallation of this kit.BEFORE YOU BEGIN • Skill level – Installation of this appliance requires basicmechanical and electrical skills.• Completion time – 1-3 hours• Proper installation is the responsibility of the installer.• Product failure due to improper installation is notcovered under the Warranty.• This kit is UL listed for installation alone or overany General Electric/Hotpoint/RCA single electricwall oven.TOOLS YOU WILL NEED#2 Phillips screwdriverPencilTape measureAwl or punchDrill with 7⁄64″ bit or #351FOR YOUR SAFETY:WARNING – Before beginning theinstallation, switch power off at service panel and lockthe service disconnecting means to prevent powerfrom being switched on accidentally. When the servicedisconnecting means cannot be locked, securely fastena prominent warning device, such as a tag, to theservice panel.Scissors (optional)

/ 4

Related manuals for GE JX2127