GE Monogram ZGU122LPSS Dimensions And Installation Information

GE Monogram ZGU122LPSS Dimensions And Installation Information Manual pdf 1 page image

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.170135Specification Created 10/08ZGU122NPSS - Natural Gas Built-in Dual-Burner CooktopZGU122LPSS - LP Gas Built-in Dual-Burner CooktopDimensions and Installation Information (in inches)Outdoor Built-in CooktopThese cooktops are designed to be installed into anon-combustible enclousure.• The cooktop drops into the opening and hangsfrom the side flanges. It does not require supportfrom the bottom.• The cutout must be completely covered withnon-combustible material such as stone, brick,ceramic tile, concrete board, etc. The countertopsurface and edges must be flat and level.• If the countertop has an overhang, it must benotched or cut back flush with the front face ofthe cabinet below. See notched detail below.• Allow 12" minimum clearance on both sidesand the back of the grill to adjacent verticalcombustible construction.• These gas cooktops cannot be used below anytype of overhead construction.• These cooktops are designed for outdoor use only.Do not locate the cooktop in a building, garage orother enclosed or semi-enclosed area.• Locate the backside of the cooktop away fromprevailing winds and avoid cooking in windyconditions.26-1/2"13"10-1/2" tothe Bottomof the SideSupport Flange12" Min. toCombustibleson All Sides11"7/8" Overlapat the back*25" Countertop Depth28" to Front of Bullnose26-1/2" to Frontof Control Panel10-7/8"24-1/2"11-7/8"Gas and Electrical LocationsOutdoorCooktopZGU122

/ 2

Related manuals for GE Monogram ZGU122LPSS