GE Consumer & IndustrialAppliancesInstallation InstructionsBuilt-In DishwasherIf you have questions, call 800.GE.CARES (800.432.2737) or visit our website at: www.ge.comIn Canada call 1-800-561-3344 or www.geappliances.caimagination at workIMPORTANT – The dishwasher MUSTbe installed to allow for future removal from the enclosureif service is required.If you received a damaged dishwasher, you shouldimmediately contact your dealer or builder.Optional Accessories – See the Owner’s Manual for availablecustom panel kits.FOR YOUR SAFETYRead and observe all CAUTIONS and WARNINGSshown throughout these instructions. While performinginstallations described in this booklet, gloves and eithersafety glasses or goggles should be worn.PDW8400JWW/BB/CCANTIBACTERIA STARTRESETTO LOCK CONTROLSPRESS HEATED DRYFOR 3 SECONDSENHANCEMENTSSELECTIONSSENSING WASHING RINSING DRYING SANITIZED CLEANCOOKWARENORMALWASHSPEEDCYCLECHINACRYSTALRINSEONLY 2 4 8DELAYHOURSADDEDHEATPREWASHHEATEDDRYREAD CAREFULLY.KEEP THESE INSTRUCTIONS.Stainless Steel Tub Models**Custom front panel models include a kit that contains atemplate, hardware, and panel installation instructions. Referto the kit instructions when installing the custom panel.IMPORTANT – Observe all governing codes andordinances.• Note to Installer – Be sure to leave these instructions for theconsumer’s and local inspector’s use.• Note to Consumer – Keep these instructions with yourOwner’s Manual for future reference.• Skill Level – Installation of this dishwasher requiresbasic mechanical, electrical and plumbing skills. Properinstallation is the responsibility of the installer. Productfailure due to improper installation is not covered underthe GE Appliance Warranty. See warranty information.• Completion Time – 1 to 3 Hours. New installations requiremore time than replacement installations.BEFORE YOU BEGINRead these instructions completely andcarefully.STOP