Instructions d’installationInstallationInstructions Microwave OvenSeries PEB3228Questions? Call 1-800-561-3344 or visit our Website at: GE Appliances.caBEFORE YOU BEGINRead these instructions completely and carefully• IMPORTANT – Save these instructions forlocal inspector’s use.• IMPORTANT – Observe all governingcodes and ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep these instructions forthe future reference.• Skill level – Installation of this appliance requiresbasic mechanical and electrical skills.• Installation time – 1 - 3 hours• The installer is responsible for the quality of theinstallation.• Product failure due to improper installation is notcovered under the Warranty.• This set is CUL approved for installation alone or incombination with a single GE or GE profile electricbuilt-in oven.•• For easiler installation and your own safety, we recom-mend that the installation of this microwave ovenbe done by two people.• Unplug the microwave oven before beginning insta-llation of this set.WARNING – This oven must be connected toa properly grounded three-pronged 120V outlet, asrequired by the National Electrical Code.PARTS INCLUDEDPART QUANTITY1Bottom duct 1Rails 2Trim kitframe1InlaidShort screws 14(11 + 3 extra)6 – painted(4 + 2 extra)NOTE : This set includes extra screws to preventtechnician from wasting time looking for areplacement screw if he lost one of them duringthe installation.For your safetyWARNING – Before starting the installation, switchoff the power at the distrubition board and block the circuitbreaker to prevent the power from being accidentally reset.If it is not possible to block the circuit breaker, put a warningclearly visible, as a label on the switch board.Long woodscrewsFinishing sets for built-inDo not alter or modify any parts of this set or anyparts of the oven.?