Specification Revised 11/03230124JGSP48BH/CH/WH – GE Profile™ 30" Slide-In Gas RangeDimensions (in inches) and Installation InformationFor answers to your Monogram,® GE Profile™ orGE appliance questions, visit our website atGEAppliances.com or callGE Answer Center® service, 800.626.2000.TMAll GE ranges are equippedwith an Anti-Tip device.The installation of thisdevice is an important,required step in theinstallation of the range.Dimensions (in inches) and Installation Information2-7/8"To FrontSurface OfCountertop20-5/8"Door ClearanceFrom FrontSurface ofCountertop31-1/43027-1/244-3/44AccessoryBackguard362"(Grates)24AcceptableGas Line &ElectricalOutlet AreaMax. depth ofcord, plug,receptacle box& gas hookup3-1/2 to preventinterferencewith drawer30 Min.30 Min.Shave Raised Edge To Clear31-1/8 Wide Control Panel364 Min.From Walls23-3/1618 Min.13 Max.329-15/16 Min.30-1/16 Max.259/1671215Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.You must use the rear filler strip kit shipped with the range or theoptional accessory backguard (JXS31, JXS32, JXS33, JXS34) wheninstalling these ranges.Note: Cabinets installed adjacent to slide-in ranges must have anadhesion spec of at least 194°F temperature rating.Optional Kits for Slide-In Gas Ranges:(Available at additional cost)Counter Cutout Dimensions (in inches)23-3/1630If you are NOT using theoptional Filler or Backguard:30If you are using theoptional Filler or Backguard:25Lower/Side Trim KitsJXS52BB—Lower Trim Kit (Black)JXS53WW—Lower Trim Kit (White)JXS55CC—Lower Trim Kit (Bisque)Endcap KitJXS40—Endcap kit to accommodatereplacement where countertop mayalready be notched.Accessory BackguardsJXS31—White Accessory BackguardJXS32—Brushed-Chrome AccessoryBackguardJXS34—Black Accessory BackguardJXS35—Bisque Accessory Backguard