GE Profile JMP31WAWW Specifications

Also see for Profile JMP31WAWW: Owner's manual

TMCreated 6/98JMP31WAWW—GE Profile™ 27" Drop-In Electric RangeDimensions (in inches) Countertop Cutout Top ViewNote: All 27" Drop-In Electric Ranges conform to U.L. requirements for min-imum spacing between range and side walls above countertop.Cabinets installed adjacent to slide-in ranges must have an adhesion specof at least 194°Installation Information: Before installing, consult installationinstructions packed with product for current dimensional data.KW Rating240V 9.8208V 7.3Important: This range is designed to hang from thecountertop. It does not rest on the floor.CountertopIf necessary, build upsides to 1-1⁄2" thick toprovide screw anchorsurface andcountertop supportLocate junction boxanywhere in shaded areaDoorclearance30" MIN. tobottom ofcabinetoverrange18Range sidesupportBack of rangeto front ofclosed doorTrim section forcountertop withpost formed orraised frontedge227-1/824-3/1622-3/1628-7/1628-1/2"MIN.27" Betweencabinets20"22-3/16"13/32Inside back wall of cabinetor rear wallAdjoiningverticalcabinetor wallabovecountertop3" MIN.(Both sides)26-1/4" MAX.Smooth cut22-7/8"Cutout3/8" MIN. Flat1-1/2" MIN.Clearance*If countertop edge is formed, thisdimension must extend to flat areaIn replacement installation, useJX27R optional backguard, if required21-3/4" cabinetface to rearof cutout23-3/8" MIN.*Flat counterOptional Backguard(Available at additional cost)JX27RBK = BlackJX27RWH = WhiteJX27RAD = AlmondFor answers to your Monogram,®GE Profile Performance Series,™GE Profile™ or GE appliance questions, callGE Answer Center® service, 800.626.2000.RListed byUnderwritersLaboratories

/ 2

Related manuals for GE Profile JMP31WAWW