GE Profile PK956SRSS Dimensions And Installation Information

Dimensions and Installation InformationFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Created 5/10220366PK956SRGE Profile™ 27" Built-In Convection/Thermal Wall OvenKW Rating240V 7.2208V 5.4Breaker Size240V 30 Amps208V 30 AmpsNote: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating. For 27” built-in single ovens,if marks, blemishes or the cutout opening is visibleabove the installed oven, it may be necessary to addwood shims under the runners and front trim untilthe marks or openings are covered.Note: Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls should beplaced to avoid interference with the handle.Electric wall ovens are not approved forinstallation with a plug and receptacle.They must be hard wired in accordance withinstallation instructions.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.CabinetA – Cabinet wB – MinimumC – OpeningD – OpeningE – RecommOvenF – Overall dG – Overall hOverall hH – Overall w*Depth includiSuitabbracinto supporunne10Locatejunction boxfor 27"modelseither 5" MIN.below cutoutfloor or 44"MIN. abovecutout floorAccessfromadjacentcabinetrequiredAllow 3/4"for overlapover all edgesof cutoutAMinimumcutout locationfrom floorDE2" X 4" orequiv. runners(cutout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21Cabinet 27"A – Cabinet width required 27" min.B – Minimum cabinet depth 23-5/8"C – Opening width 25" min. - 25-1/4" maxD – Opening height 50-1/8" maxE – Recommended minimum cutout location from floor 13-1/4"OvenF – Overall depth* 23-5/8"G – Overall height with trim 51-7/8" - 52-3/4"Overall height without trim 51"H – Overall width 26-5/8"*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.CLSuitablebracingto supportrunners 18"Over centerlineof cabinet(must support 300 lbs.)2" x 4" orequivalentrunners10boxodelsMIN.tout4"veortAllow 3/4"for overlapover all edgesof cutoutAcationrDE2" X 4" orequiv. runners(cutout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21Dimension and installation information are shown in inches.

/ 2

Related manuals for GE Profile PK956SR