GE ZDP364LRPS Dimensions And Installation Information

Also see for Monogram ZDP364LRPSS: Owner's manual Owner's manual

Contents

advance planning

GE ZDP364LRPS Dimensions And Installation Information Manual pdf 1 page image

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.130555Specification Created 7/08Listed byUnderwritersLaboratoriesZDP364NRPSS (Natural Gas)ZDP364LRPSS (Liquid Propane)GE Monogram® 36" Dual-Fuel Professional Range with 4 Burners and GrillDimensions and Installation Information (in inches)Professional ranges offer a number of choices in size andcooktop configurations.All Professional Ranges are factory set for natural or liquidpropane gas. The correct model should be ordered for theinstallation situation.Note: Conversion kits are included with the range if the wronggas type was ordered. High Altitude kit, WB28K10553 foroperation above 3,000 feet (for Natural and LP gas models), isalso available. The kits must be installed by a qualified servicetechnician at additional cost.Installation InformationBefore installing, consult installation instructions packed withproduct or online at Monogram.com for current dimensionaldata.A 36" or 42" wide professional vent hood with a minimum600 CFM is recommended for installation over this range.Advance PlanningRefer to dimensional drawingsfor appropriate placement andnecessary clearances whenplanning the installation.• Working areas adjacent to therange should have 18" minimumclearance between countertopand cabinet bottom.• Clearance between range and sidewall or combustible material mustbe at least 12" on each side.• Installation must conform withlocal codes. In the absence of localcodes, the range must comply withthe National Fuel Gas Code, ANSIZ223.1-1990.

/ 3

Related manuals for GE Monogram ZDP364LRPSS