GE ZX42DC10 Dimensions And Specifications

Contents

duct cover accessories

GE ZX42DC10 Dimensions And Specifications Manual pdf 1 page image

zv42ishss – GE Monogram 42" Professional Taper-sided island hoodDimensions and specifications (in inches)For answers to your Monogram,® GE Profile™ orGE ® appliance questions, visit our website atGEAppliances.com or call GE Answer Center ®service, 800.626.2000.specification Revised 2/08130660Listed byUnderwritersLaboratoriesDuct Cover AccessorieszX42DC10–For ceiling heights of 8' 6" to 10' 4". Includes telescopingsupport frame and decorative cover.Order accessory at the same time as the vent hood and have on sitebefore installation begins.Product ClearancesThese vent hoods must be installed 30" min. to 36" max. above thecooking surface. Exact installation height is determined by ceilingheight. The cooking surface should be at least 36" above the floor.important: Clearances may vary due to type of cooking productand local codes. Check with local inspectors to be sure standardis applicable.When installing the Island Hood above a Monogram ProfessionalRange or Cooktop, installation clearance must be at least 30".20"14"25-3/4"31-3/4" 42"9"**9" for ceiling heights of 7’11" to 8’5"using the supplied support frame and duct cover**9" for ceiling heights of 7' 11" to 8' 5" using the supplied supportframe and duct cover.This vent hood is designed to be used in ceiling mounted installations.

/ 2

Related manuals for GE Monogram ZV42ISHSS