GEEBEE EPP-3D Instruction Manual
    | |
Contents | 
组装前请认真阅读说明书Before use, please read the explanations carefully!GEEBEE EPP-3DInstruction Manual 说明书零件表Specifications 参数Fuselage Length 全长 910mmWingspan 翼展:1000mmFlying Weight 飞行重量:540-570g(with battery)Additional Required Equipment (not included inthe kit):其他设备（另购）Motor 电机:2217 1000KV (power: 180-220W)ESC 电调: 25ASlow Flyer Prop 慢速桨:10*4.7Servo 舵机: 4 × 9GReceiver 接收机: 4 channels 通道Battery 电池: 11.1V 1200-1500mAh 20C Li-poSAFETY PRECAUTIONS 安全事项1. We recommend that you get the assistance from an experienced pilot when assembling.不熟悉组装的人请向有经验的人请教，听取他们的意见后再进行组装。2. The kit contains small parts. So keep out of children’s reach when assembling.飞机含小部件，请在幼儿接触不到的地方进行安装工作。3. The flying weight of kit is about 550g. In order to ensure the flight performance, use themotor and battery with suitable weight.该飞机起飞重量 550 克左右，为了确保飞行性能，请勿使用超规格的马达和电池。主机翼 （对） main wing （pair）：1机身 fuselage: 1机身加强筋（对） stiffener of fuselage （pair）：1水平尾翼 tailplane：1方向舵 rudder servo：1木质马达座（套） Plywood motor mount（set）：1Z 字形钢丝 Z-shaped steel wire：8机轮及塑料轮档 airplane wheel and plastic wheel chock：2起落架钢丝 landing gear steel wire：1起落架木支撑 wood support plate of landing gear ：1舵角 servo horn：4舵角木底座 wood servo horn mount：2热缩管 hot shrink tube：1980mm 碳纤棒 980mm C-bar：5舵机安装木底座 wood servo bracket： 4升降舵木条 elevator servowood chip： 2 |
Related manuals for GEEBEE EPP-3D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine