S/4 LED Copper Firefly LightsH537 v001: 15/01/21Please read and retain these instructions for future referenceASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:Unpack the components carefully. Please check all parts have been removed from the packaging.Operation1. Carefully take out the LED light chain from the box.2. Open the battery compartment and insert 3x AA batteries (not included).Warning: For indoor use only3. Close the battery compartment and switch on.BATTERIES• Keep batteries away from children and pets.• Do not mix used and new batteries.• Install batteries in accordance with its polarity symbols.• Remove the batteries if left for long periods.• Never dispose of batteries in a fire.• Keep batteries away from children and pets.• Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliancewith local regulations. For detailed information, contact your local authority.• Follow the battery manufacturer’s safety, usage, and disposal instructions.Dimensions5.2m long (approx.)• SET 4• EACH ONE HAS 50 WARM WHITE LEDS WITH 10CM INBETWEEN EACH LED (LEDs not replaceable)• TOTAL LENGTH 5.2M• BATTERY OPERATED, POWERED BY 3XAA BATTERIES (NOTINCLUDED)• THE COPPER WIRE EASILY BENDS AND TWISTS MAKETHEM HIGHLY VERSATILE, WRAP AROUND MIRRORS,FIREPLACES, PICTURE OR IN FLOWER ARRANGEMENTSAND VASES• THEY GIVE OFF A MAGICAL GLOW ALMOST MIMICKINGFIREFLIESBatteries: 3 x AA (not included)Cord length: 30cmBulb spacing: 10cm