G&G RM-GG-950W User Manual
   |
RM-GG-950WRM-GG-950W Portable Label PrinterPlease read this carefully before using the printer and keep the manual ina handy place for future reference.USER'S GUIDERM-GG-950W Label PrinterUser's guide, warranty card USB cableThermal paper One rollOne battery, which ispre-installed in the printerConfirm the packing listFully charge the battery before using it for the first time. After thebattery is stored for a long time, it must be fully charged first, and thebattery will achieve the best results.PreparationRemarksPrepare the printer for use, including open the label cover, charge thebattery and install the paper rolls.BatteryThermal paperScan the QR code to download the APPDownload and register the printing software APP1.Search QLabel in theApp store 2.Open and install the APP 3.Sign up for an accountIOS Android4.Click the NEW label to set thelabel specification 6.Click Print after editing5.Click Text to create a newlabel contentOperating procedures of mobile APP software7.Click Connect to turn onBluetooth8.Connect to the printer viaBluetooth9.Return to the print screen toprintCautionInstall rollsDo not take out the batteryduring charging.It can print properly while charging.USB/Power interfaceCharging: The battery indicator will flash.End of charging: The battery indicator icon will show full power and stopflashing.RM-GG-950W Label Printer uses the paper roll with a maximum diameter of50mm and a maximum size of 57mm×50mm as the consumable.CautionFirst, make sure that the paper roll youare using is a special paper roll for thismodel supplied by G&G.Make sure the paper roll is adjusted tothe proper width.Cover the label cover after loading thethermal paper. Place the paper rollas shown and Put theprint side face down.Front ViewDescription of printer partsLabel CoverUSB/ Power interfaceLabel exit slotDisplayFEED Key/Setup KeyPower Key/Function KeyPaper CutterRare ViewLateral ViewWireless CommunicationUSB ModeDescription of LCD displayAfter bluetooth pairing, the icon shows the connecting status .WirelessCommunication Setup Mode/USB Lack Of Paper ExternalPower Supply Power IndicatorText Description AreaIcon AreaSetup ModeLack Of PaperExternal Power SupplyPower IndicatorText Description AreaThis icon indicates that the printer’s USB is connected.This icon indicates that the printer has entered the Setup state.This icon displays when the printer is out of paper or does not load thepaper roll properly. At the same time, the text description area shows:No Paper Detected.This icon indicates whether the external power is inserted. When thecorrect external power is input, the icon will be displayed. When theexternal power is pulled out, the icon will disappear.This icon is used to indicate power. When charging, the icon flashes toindicate charging status; When the battery is weak, please charge thebattery in time.This area displays the relevant text information.Start your printerPress the power key of the printer for 2 seconds,and the printer will start upLanguage:English/Simple Chinese:Press the Feed key to setthe language type of theoperation interfaceBasic FunctionSettingPrinter shut offPress the power key of the printerfor 2 seconds when it’s started up,and the printer will shut offPrintPress the FEED key:Output a section of paperShutdown modeAutomatic shutdown can be setwhen the printer is in standby stateFunction ModePrint Key/Setup KeyBasic SettingsEnter the setting interface after starting the printerPower Key:Switch languagePower Key:Switch the printing colorPrinting color:(The most light concentration) 1-3(Light concentration) 4-5(Normal) 6-9(Dark color) 10-14(The darkest color) 15Press the Feed key to set theprint definitionGG950WGG950Wተሮφ [00ᶆ䍞φJਂ㜬㓮RM GG 950W |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine