Garmin 30A XM Installation Instructions Manual
Also see for GDL 30A - XM Radio Tuner Module: Important safety information
        |
GDL™ 30A XM WeAther DAtA receiver instALLAtion instructionsTo obtain the best possible performance, install the GDL 30A Weather Data Receiver according to the following instructions. If you experiencedifficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.Product RegistrationHelp us better support you by completing our online registration today! Connect to our Web site at http://my.garmin.com. Keep the originalsales receipt, or a photocopy, in a safe place.Contact GarminContact Garmin if you have any questions while using your GDL 30A. In the USA contact Garmin Product Support by phone:(913) 397-8200 or (800) 800-1020, or go to www.garmin.com/support/.In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK).WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other importantinformation.Important NumbersFor future reference, write down the important numbers associated with your GDL 30A. The serial number is located on the bottom of the unit.Serial numberUnique ID numbers are associated with your GDL 30A. XM Satellite Radio™ uses these ID numbers to activate and deactivate your XMweather and XM audio. To locate the ID numbers on a GPSMAP® 3000 Series chartplotter, refer to the Main Menu section of the GDL30A Owner’s Manual. To locate the ID numbers on a GPSMAP 4000 or 5000 Series chartplotter, select Configure > System > SystemInformation.XM WX Weather™ IDXM Radio IDPacking List, Accessories, and Tools NeededBefore installing your unit, check that your package includes the following items. If any parts are missing, contact your Garmin dealerimmediately.Standard PackageGDL 30A unit7-pin power cableGarmin Marine Network cable—6 ft. (1.8 m)DocumentationAudio cableGrommetGA 32 AntennaSurface-mount bracketPole-mount bracketUnder-deck mount bracketMounting hardware (screws and adhesive pads)•••••••◦◦◦◦Optional AccessoriesGMS 10 network port expanderGarmin Marine Network cables (20 ft. and 40 ft.)Tools Needed (Not Included)Drill and drill bitsFasteners (to mount the GDL 30A)Hole saw, 1 in. (surface-mount cable hole)Screwdriver (surface-mount screws)Center punch and hammer (to mark surface-mount pilot holes)Countersink bit (when mounting on fiberglass)Marine sealant (for certain mounting options)•••••••••May 2008 190-00930-02 Rev. B Printed in Taiwan |
Related manuals for Garmin GDL 30A - XM Radio Tuner Module
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine