Garmin FUSION APOLLO MS-WB675 Installation Instructions Manual

Also see for FUSION APOLLO MS-WB675: Manual

Garmin FUSION APOLLO MS-WB675 Installation Instructions Manual Manual pdf 1 page image

APOLLO™ MS-WB675INSTALLATION INSTRUCTIONSImportant Safety InformationWARNINGFailure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poorproduct performance.See the Important Safety and Product Information guide in the product box for product warnings and otherimportant information.This device must be installed according to these instructions.Disconnect the vessel's power supply before beginning to install this product.Before applying power to this product, make sure it has been correctly grounded according to theseinstructions.CAUTIONTo avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,cutting, or sanding.NOTICEWhen drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.Do not use the stereo as a template when drilling the mounting holes because this may damage the glassdisplay and void the warranty. You must only use the included template to correctly drill the mounting holes.You must read all installation instructions before beginning the installation. If you experience difficulty duringthe installation, contact Fusion®Product Support.What's In the Box• Four 8-gauge, self-tapping screws• Power and speaker wiring harness• Auxiliary-in, line-out, and subwoofer-out wiring harnesses• NMEA 2000®drop cableTools Needed• Phillips screwdriver• Electric drill• Drill bit (size varies based on surface material and screws used)GUID-F34CD991-7A3F-4535-BEF0-3773CD4104C5 v1February 2023