GPSMAP® 700 Series Installation Instructions WARNINGSee the Important Safety and Product Information guide in the product box for product warnings and other important information. CAutIoNAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.NoticeWhen drilling or cutting, always check what is on the opposite side of the surface to avoid damaging your boat.The GPSMAP 700 series chartplotter must be properly installed according to the following instructions. You need the appropriate fasteners,tools, and mounts listed in each section. These items are available at most marine dealers.Contact Garmin® Product Support if you have any questions while installing your GPSMAP 700 series chartplotter. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by phoneat 0808 2380000. In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin(Europe) Ltd. by phone at +44 (0) 870.8501241.Before installing your GPSMAP 700 series chartplotter, confirm that the package contains the items listed on the box. If any parts are missing,contact your Garmin dealer immediately.Product RegistrationHelp us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or aphotocopy, in a safe place.For future reference, write the serial number assigned to your GPSMAP 700 series chartplotter in the space provided. The serial number islocated on a sticker on the back of the device.Chartplotter serial number:to install the GPSMAP 700 series chartplotter, you must:1. Mount the GPSMAP 700 series chartplotter.2. Connect the chartplotter to power (page 5).3. Ensure that the chartplotter software is up-to-date (page 7).the following additional installation options are not necessary in order to use the GPSMAP 700 series chartplotter. they havebeen included for your convenience:• Connecting the chartplotter to a NMEA 2000 network (page 6)• Connecting the chartplotter to a GA 30 remote GPS antenna (page 6).• Connecting the chartplotter to a Garmin marine radar (page 6).• Connecting the chartplotter to other NMEA 0183-compatible devices such as a VHF radio with DSC (page 5).• Connecting the chartplotter to a sonar transducer (“s” models only) (page 6).Mounting the ChartplotterYou can mount the GPSMAP 700 series chartplotters using one of two methods. You can use the included bracket and hardware to bail mountthe chartplotter, or you can use the included template and hardware to flush mount the chartplotter.Mount the GPSMAP 700 series chartplotter in a location that provides a clear, glare-free view of the display and easy operation of the powerkey and the touch screen.February 2010 Part Number 190-01155-02 Rev. B Printed in Taiwan