“The Integrator”NMEA 0183 to AD10 Converterfor Furuno Radar/ChartplottersInstallation and User Manual906-2800-00Ver A01

Garmin TR-1 Installation And User Manual

Gladiator TR-1

installation overview

Safety

Parts List

Hydraulic Layout (Single Helm)

Hydraulic Layout (Dual Helm)

Electrical Layout

Installation Check List

Gladiator Specifications

Mounting Considerations

Hydraulic Connections

Compass Ball Installation

Electronic Control Unit (ECU)

NMEA 0183 Connections

Non-Compliant NMEA Devices

Tachometry Connections

Battery Connection

Dockside Setup

Sea Trial Setup

Autotune

Set North

Fine Tuning

Section III: Troubleshooting

Table of Setup Codes

GPS Connection Guide

Introduction

Remote Functions, Two Button

Remote Functions, Five Button

Installation

Security Codes

limited warranty

Introduction to operation and adjustments

Operating the system

Power On/Off (Deckmount Switch)

Making a turn while in Autopilot

Shadow Drive

Selecting patterns

Change heading using Man Overboard

Change heading using Zigzags

Change heading using Step Turns

Change heading with circles

Change heading with U-Turns

GPS Steering patterns

Course over ground

Cloverleaf pattern

Search pattern

How to change settings using the table of setup codes

autopilot setup

Dockside setup and sea trial setup of autopilot

Compass calibration

Trouble shooting guide

Electrical layout

NMEA 0183 connections

Non-compliant NMEA 0183 devices

TR-1 The Integrator