Garmin VHF 315 Series Installation Instructions Manual

Also see for VHF 315 Series: Installation instructions Quick start manual Owner's manual

Garmin VHF 315 Series Installation Instructions Manual Manual pdf 1 page image

VHF 315 SERIESINSTALLATION INSTRUCTIONSImportant Safety InformationWARNINGSee the Important Safety and Product Information guide in the product box for product warnings and otherimportant information.CAUTIONTo avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,cutting, or sanding.NOTICEWhen drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.Tools Needed• Pencil• Drill• 22 mm (7/8 in.) drill bit or hole saw• 3 mm (1/8 in.) drill bit• 13 mm (1/2 in.) drill bit• 4.76 mm (3/16 in.) wrench (for mounting the handset connector)• Additional drill bits appropriate for the surface and hardware• Phillips screwdriver• Rotary cutting tool or jigsaw (for mounting the active speaker)• Marine sealant (optional)Mounting ConsiderationsNOTICEThis device should be mounted in a location that is not exposed to extreme temperatures or conditions. Thetemperature range for this device is listed in the product specifications. Extended exposure to temperaturesexceeding the specified temperature range, in storage or operating conditions, may cause device failure.Extreme-temperature-induced damage and related consequences are not covered by the warranty.• You must mount the device in a location where it will not be submerged.• You must mount the device in a location with adequate ventilation where it will not be exposed to extremetemperatures.GUID-395B9869-0DCF-4E17-A266-0D9FF08A27DE v3June 2021