Garrett Axiom Quick Start Manual

Also see for 1142720: User manual

Garrett Axiom Quick Start Manual Manual pdf 1 page image

Quick Start GuideASSEMBLYThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) thisdevice must accept any interference received, includinginterference that may cause undesired operation.Changes or modifications not expressly approved bythe party responsible for compliance could void the user’sauthority to operate the equipment.This device complies with Industry Canada license-exemptRSS standard(s). Operation is subject to the following twoconditions: (1) this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of thedevice.Ce produit est conforme aux normes RSS exemptes delicence d’Industry Canada. Son fonctionnement est soumisaux deux conditions suivantes : (1) ce dispositif ne peut pasprovoquer d’interférences et (2) ce dispositif doit acceptertoute interférence, y compris celles pouvant entraîner undysfonctionnement.Wireless Transmitter SpecificationsAudio Delay: 17 millisecondsAudio Bandwidth: 30-18,000 HzOperating Frequency: 2406–2474 MHzTransmit Power: 8.6 dBm EIRPCertifications: FCC, CE, IC, AS/NZRelease clamp, extend lower stem. Press the mountingwashers into place.Insert lower stem intosearchcoil bracket.Insert bolt, and hand-tighten wing nut.Wrap cable around stem, with the firstturn of cable over the stem. Attach toback of control box, tighten collar.REGULATORY INFORMATION / INFORMACIÓN NORMATIVA / INFORMATIONS RÉGLEMENTAIRES© 2022 Garrett Electronics, Inc. PN 1557400.A.0522Click to access detailed Axiom guides in other languages.Cliquez pour accéder aux guides Axiom détaillés dans d’autres langues.QUICK START3 feet (1 m) per second at 1/2 inch (1.25 cm) above groundPower ON. Set Sensitivity,Threshold and Volume. Perform Frequency Scan (if needed to eliminate EMI).Ground Balance(if needed toeliminate groundresponse).Beginscanning.Lengthen lower stemuntil it snaps into place.Adjust upper stem.BATTERY CHARGING12V battery terminal charging with optionalcables. Charge time: 10 hours approx.ADJUSTING ARM CUFFUse hexnut wrench(stored below cuff )to remove fourscrews.Move cuff up totwo slots forwardor backward (atleast 2 bolts mustbe secured).Clip Axiom Booster Pack into thestand below the detector cuff.Axiom Booster pack uses eight(8) AA akaline or NiMh batteries.Note proper polarity direction.PUse supplied 3-amp USB wall charger.Charge time: 7 to 8 hours approx.Plug cable into the USBconnector on back ofAxiom.اضغط للحصول عىل أدلة اكسيوم املوضحة باللغة األخرى

/ 2

Related manuals for Garrett 1142720