Gemini 933MHW User Manual

Also see for 933MHW: Installer and user manual Installer and user manual

Gemini 933MHW User Manual Manual pdf 1 page image

Designed and manufactured by GEMINI TECHNOLOGIES srl ‐ Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – ItalyTel. +39 0332 943211 – Fax +39 0332 948080 – www.gemini‐alarm.comISO 9001 CERTIFIED COMPANYAC2955 Rev.00 01/20181/41.0 - INTRODUCTORY NOTE2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENT3.0 - OPERATING INSTRUCTIONS3.1 - Complete system arming3.2 - System arming with sensors exclusion3.3 - Passive arming3.4 - Arming delay3.5 - System armed3.6 - Alarm, inhibit time between alarms and alarm cycles3.7 - System disarming3.8 - Alarm memory4.0 - LEARNING & DELETING DEVICES4.1 - Learning new devices4.2 - Deleting programmed devices5.0 - TECHNICAL SPECIFICATIONS6.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT DIRECTIVE (WEEE)Dear customer, thank you for choosing this GEMINI product designed and manufactured in Italy specifically for recreational vehicles.This new generation CANBUS alarm system has been implemented with a 2.45GHz transceiver and ZigBee wireless technology with anti-jamming reliability.Please read the present manual carefully to familiarize yourself fully with the operation of your alarm system and do keep it for future reference.If the right connections have been made, the vehicle doors will lock/unlock when pressing the arming/disarming buttons.If the LED light blinks 3 times when pressing any button, the battery is weak and must be replaced as follows:Use only 23AE batteries.ATTENTION: Risk of explosion if battery is replaced by an incorrect type.Discard used batteries properly in special dedicated containers.ALARM KIT 933MHWUK1.0 - INTRODUCTORY NOTE2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENTBUTTON 1:TOTAL SYSTEMARMING(and door lock)BUTTON 3:PARTIAL ARMING(door lock & sensor exclusion)BUTTON 2:SYSTEM DISARMING(and door unlock)

/ 4

Related manuals for Gemini 933MHW