GE370 – GEMINI ELECTRONIC:BASIC PROGRAMMING STEPSChanging the master code:Out of the box, the GE370 is already programmed with a default master code(11 33 55 77) and a default user code (22 44). It is highly recommended by themanufacturer that both of these codes be changed immediately by the userafter installation. Do NOT forget the new master code you choose – you willnot be able to use any of the programming functions without the master code.***Make sure the lock is unlocked prior to any programming***To change the master code, follow these steps: (1) Press “#” [there will be twoquick green flashes] (2) Enter the old master code [you will see several rapidgreen flashes] (3) Press “01” [you will see several rapid green flashes] (4) Enteryour new 8 digit master code [you will see several rapid green flashes] (5) Re-enter your new 8 digit master code to confirm. Your new master code is set.

Gemini GE370 Basic Programming Steps