Gemini Tinytag TE-4600 Manual

Gemini Tinytag TE-4600 Manual Manual pdf 1 page image

Tinytag Plus LAN Data Logger with Temperature & Relative Humidity ProbeTinytag Plus LAN Data Logger with Temperature & Relative Humidity ProbeTinytag Plus LAN Data Logger with Temperature & Relative Humidity ProbeTinytag Plus LAN Data Logger with Temperature & Relative Humidity Probe((((----25 to +85°C/0 to 100% RH)25 to +85°C/0 to 100% RH)25 to +85°C/0 to 100% RH)25 to +85°C/0 to 100% RH)TE-4600Issue 1Issue 1Issue 1Issue 1 (19th April 2019) E&OEwww.tinytag.infowww.tinytag.infowww.tinytag.infowww.tinytag.infosales@tinytag.infosales@tinytag.infosales@tinytag.infosales@tinytag.info• Ethernet connectivity (communicates across a LAN)• Temperature & relative humidity monitoring• User programmable audible & visual alarm• Alarm output, to trigger external device• Power over Ethernet (PoE) with battery back-up• Waterproof case• Tinytag Connect compatibleThe TE-4600 is a temperature and relative humidity data logger that plugsdirectly into a network point and communicates across a LAN.The logger can be managed as a standalone logger, in conjunction with thestandard version of Tinytag Explorer, or as part of a network of loggers, usingTinytag Connect software.The data logger measures temperature and relative humidity using a probe.The logger records data at user-defined logging intervals and can beprogrammed to give alarm alerts, both audible and visual, in the event of aproblem. The logger also has an alarm output that changes state when alarmsare active.StandaloneWhen used as a standalone device, the logger connects to a standard versionof Tinytag Explorer across a LAN and is downloaded and configured directly.Tinytag ConnectWhen used as part of a Tinytag Connect system, the logger transmits data toa Windows service that runs the system, called the Connect Gateway. Thisdata is then viewed, and loggers configured, using the Connect version ofTinytag Explorer.Multiple users can access the Connect system simultaneously.If a logger cannot communicate with the system for any reason, data will berecorded locally until communications are restored, ensuring no data is lost.The Connect system can also send e-mail warnings when alarm limits areexceeded.Working With the DataUsing Tinytag Explorer, data recorded by the logger can be viewed as a graphor as a table of readings. There are also summary views containinginformation about the recording and a daily min/max view.Data from multiple devices recording at the same time can be combined into asingle graph.Graphical data can be exported from the software as an image, for use inreport writing or presentations, or as a data table, for further analysis in third-party spreadsheet and data base programs.connect