Genie IP8GESP/E User Manual
  |
Please follow installation steps as below:Please check the following items before installation, if it is missing, please contact the dealer.Ethernet Switch 1pcPower Adapter 1pcAC Power Cable 1pcAccessory 1pcUser Manual 1pc1) Turn off the power of all the related devices before the installation; otherwise the device would bedamaged;))4)5)6)2 Connect PoE cameras with 1~8 downlink ports of product by Ethernet cable;3 Connect UPLINK port of product with NVR or PC by Ethernet cable;Connect power adapter;Check if the installation is correct, equipment is in good condition, the connection is stable,thenpower on for system;Ensure the Ethernet equipment with power on can work properly.Installaiton StepsFeature1 2Board DiagramMain Function:Ethernet ports and 1*gigabit SFP ports;Compliance with standards: IEEE802.3 、IEEE802.3u、IEEE802.3ab、IEEE802.3z、IEEE802.3X、 IEEE802.3af/at;PoE Power Supply: With 8x gigabit PoE RJ45 ports, each port supports max. 30W PoE output,whole machine reaches 120W PoE power output;One-key CCTV: Quickly achieve isolation among downlink ports vis dial switch, effectivelyrestrain network storm, improve network feature;Protection: Support 6KV surge immunity, EFT testing standard;Operation Environment: Support -10℃~45℃ wide-temperature;Operation: Plug&play, convenient to use, support desktop, wall-mounted installations.Provide 8*10/100/1000Base-T Ethernet ports(PoE) ,1* 10/100/1000BASE-TApplicationThe transmission distance depends on the signal source and cable quality; standard Cat5e/6Ethernet cable is strongly suggested for reaching the maximum transmission distance!Notice1) Device must be connected with lightning protection grounding; otherwise protection level will begreatly reduced; please use above No.20 wire to connect the grounding terminal;2) The device requires rebooting after the dial switch has been utilized.Side BoardKensington Security SlotCat5e/6PoE PTZ CameraPoE CameraPoE Dome CameraPoE CameraLCDNVRPowerRouter8 Ports Full Gigabit PoEEthernet SwitchBack BoardFront Board4口百兆以太网交换机8 Ports Full Gigabit PoE Ethernet Switching and otheroccasions.8 Ports Full Gigabit PoE Ethernet SwitchEthernet access and PoE applications. It provides eight Gigabit downlink ports, one Gigabit uplinkEthernet port, and one Gigabit optical SFP module slot. The eight downlink ports support 802.3af/atstandard and feature Max. 30W PoE power output of single port, Max. 120W of whole machine. Thedevice supports one-key VLAN which isolates the communication between downlink and uplinkports. It can be widely used in security surveillance, hotels, schools, SMB engineeris an unmanaged Ethernet switch designed for GigabitV1.0CCTV-mode Toggle Switch Power LEDPower PortPoE Downlink Ethernet PortsUplink Ethernet PortUplink Optical PortGrounding8 Ports Full Gigabit PoE Ethernet SwitchUser ManualNotice |
Related manuals for Genie IP8GESP/E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine