Genie Universal Series Alternate Instructions
   |
Page 1ALTERNATE INSTRUCTIONSUNIVERSAL WIRELESS WALL CONSOLEUNIVERSAL WIRELESS WALL CONSOLEUNIVERSAL WIRELESS WALL CONSOLEUNIVERSAL WIRELESS WALL CONSOLEAlternate instructions for the Teach & Pair Programming Method, for Fixed Code/Dip SwitchProgramming and alternate blink rates are to be used in conjunction with the main instruction set.Changes made to the blue LED blink rate pattern will impact battery life. For best battery life, see Blink RateMode 3 to turn LEDs off completely.BLUE LED Blink Rate Mode 1: Factory Default Setting(Blink Rate - Once every 3 sec) With only (1) AAA battery installed - hold down the TOP DOOR button whilesimultaneously installing the second AAA battery. Continue to hold the TOP DOORbutton for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONS blink 3times in unison.BLUE LED Blink Rate Mode 2(Faster Blink Rate - Once every 2 seconds) With only (1) AAA battery installed - hold down the MIDDLE DOOR button whilesimultaneously installing the second AAA battery. Continue to hold the MIDDLEDOOR button for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONSblink 3 times in unison.BLUE LED Blink Rate Mode 3(Blue LED OFF - Maximum Battery Life) With only (1) AAA battery installed - hold down the BOTTOM DOOR button whilesimultaneously installing the second AAA battery. Continue to hold the BOTTOMDOOR button for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONSblink 3 times in unison.Page 1: Changing Blink Rate PatternsPage 2: Fixed Code/Dip Switch ProgrammingPage 3: TEACH & PAIR Programming MethodALTERNATE INSTRUCTIONSCHANGING BLINK RATECHANGING BLINK RATECHANGING BLINK RATECHANGING BLINK RATE PATTERNSPATTERNSPATTERNSPATTERNS |
Related manuals for Genie GUWWC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine