Geo Trio II Touch Button Quick Start Manual
Also see for Trio II Touch Button: User manual
  | |
Contents | 
Electricity & GasYou can see more about your energy consumption (bothelectricity and gas) by selecting an option from the Menu.DayYour hourly energy use for today. You can see this in termsof energy (kWh) or cost (£) - select the w button to changebetween kWh or £.The row shown in LIGHT GREEN is the hour during which mostenergy was consumed. The total is to the right.Week, Month and YearA visual representation of energy use over the past nine days,six weeks or 14 months, with the period of highest energyconsumption highlighted.If a budget has been set (see Settings > Budget), thenperformance against a budget is shown. The areas shaded inRED show where over-budget energy has been used.Technical specificationsThis product is designed to be used indoors in a domesticenvironment. It is not suitable for outdoor use. It is intendedto be installed and configured by a qualified installer only.Supply voltage 240Vac, 50HzOperating voltage 5VdcOperating power < 0.6WOperating temperature 0 to 40ºCOperating humidity 0 to 85% non-condensingFurther informationMore detailed information on the Trio II is available online athttp://www.geotogether.com/trio2Safety noticePlease be aware of these simple safety precautionswhen using this product. Safe operation of your Trio IImay be hindered if used in a way that is not specified bythe manufacturer.Keep the Trio II away from water and other liquids.Disconnect from mains power supply before cleaning(with a soft, dry cloth only). Please contact yoursupplier if any components appear damaged or faulty.Your Trio II is designed to be used in an indoor,domestic environment only.To protect the environment, this product and itsbatteries must be disposed of safely.This product is CE approved.This product complies with RoHS regulations.ManufacturerDesigned and manufactured by:Green Energy Options Ltd.3 St. Mary’s Court, Main Street, Hardwick, CambridgeCB23 7QS, UKHereby, Green Energy Options Ltd. (UK) declares that theradio equipment enclosed (identified by the product typenumbers on the product label) are in compliance withDirective 2014/53/EU.The full text of the EU declaration of conformity is availableonline at www.geotogether.com/cedocTR2L-A-QRG-001_3TroubleshootingMy monitor isn’t showing any informationIf your monitor shows Waiting for data, this could bebecause your monitor is out of range and is not able tocommunicate with the smart meter. Try moving your monitorcloser to the smart meter.If problems persist, please contact your supplier.My display is making a noiseThe display has a built in speaker which is used to notify youof alerts, messages and can also provide feedback when youinteract with the display. You can adjust the volume, and turnoff/on the different sounds via the Settings page.System Status shows a cloud errorThe cloud service is only available if your Trio II has theoptional Wi-Fi module fitted.When the System Status screen shows the cloud symbol(p) in red or amber, then this means one of the following:• Your cloud account has not been configured.• The monitor is unable to access the cloud service - checkyour home broadband connection.• The cloud service is temporarily offline.My monitor is blank or has switched itself offThe monitor backlight may have turned itself off to save power,press one of the touch buttons to switch it back on. This settingcan be changed under Settings.If you are using batteries to power the monitor, the batteriesmay have gone flat. The battery icon (o) will be shown whenoperating on battery power. The running time is four hours.Reconnect to the mains adaptor or replace the batteries.We recommend that the monitor is powered continuouslyusing the power supply provided.Trio II Touch ButtonQuick Start GuideTR2L-A-QRG-001_3.indd 1 30/05/2017 11:54 |
Related manuals for Geo Trio II Touch Button
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine