21H3C MSR3600-28-X1[28-X1-DP][51-X1][51-X1-DP] Routers Installation Quick Start-AP100H3C MSR3600-28-X1[28-X1-DP][51-X1][51-X1-DP]路由器 快速安装指南-AP100Accessories 安装附件介绍Wear an ESD wrist strap. Make sure the strap makes good skin contact and is reliably grounded.操作者需佩戴防静电腕带,确保防静电腕带与皮肤良好接触,并确认防静电腕带已经良好接地。The installation tools are not provided with the device. Prepare them yourself as required.设备不随机提供安装工具,请用户根据实际安装需求自己准备安装工具。Mounting the device on a workbench 安装设备到工作台Tool list 工具参考!Cage nut (user supplied)浮动螺母(用户自备)Grounding cable地线M6 screw (user supplied)M6 机柜螺钉(用户自备)Mounting brackets挂耳M4 screwM4 挂耳螺钉Flat-head screwdriver一字螺丝刀Phillips screwdriver十字螺丝刀Needle-nose pliers尖嘴钳Wire-stripping pliers剥线钳ESD wrist strap防静电腕带Diagonal pliers斜口钳Heat gun热风枪Network cable tester测线仪Multimeter万用表Marker记号笔Airflow design of the device 设备的风向设计Power cord电源线Console cable配置电缆Rubber feet脚垫Baillatch电源线卡钩Mounting the device in a rack 安装设备到机柜Install cage nuts 安装浮动螺母1RUAttach the mounting brackets to the device 安装挂耳到设备ThisdocumentusestheMSR3600-28-X1-DProuterasanexample.本手册仅以MSR3600-28-X1-DP为例进行介绍。BOM:3104A0X1