1Protectionfunction 保护功能 Protection state 保护状态特征 Support for auto-recovery 恢复特性Output overvoltageprotection输出过压保护The power module does notsupply power, and the powermodule status LED is steady red.无输出,指示灯红灯常亮No. Power supply can restore only whenyou reconnect the power cord to thepower source.故障排除后,重新插拔输入线缆电源可恢复,指示灯绿灯常亮Output currentlimiting protection输出限流保护The power module does notsupply power, and the powermodule status LED is steady red.无输出,指示灯红灯常亮Power supply restores after the outputcurrent decreases to an acceptablerange.故障排除后可自恢复,指示灯绿灯常亮Output short circuitprotection输出短路保护The power module does notsupply power, and the powermodule status LED is steady red.无输出,指示灯红灯常亮Power supply restores after the shortcircuit problem is resolved.故障排除后可自恢复,指示灯绿灯常亮