H3C S5130S-EI Switch SeriesInstallation GuideNew H3C Technologies Co., Ltd.http://www.h3c.comDocument version: 6W108-20210427

H3C S5130S-EI Series Installation Manual

S5130S-EI series

installation guide

documentation feedback

Preparing for installation

Examining the installation site

Laser safety

Installing the switch

Attaching the mounting brackets to the switch

Rack-mounting the switch

Mounting the switch on a workbench

Grounding the switch

Grounding the switch with a grounding conductor buried in the earth ground

Grounding the switch by using the PE wire of the AC power cord

Installing a power module

Connecting the power cord

Connecting the AC power cord for a switch with fixed power modules

Connecting the power cord for a PSR75-12A/PSR150-A1 power module

Connecting the power cord for a PSR150-D1 power module

Verifying the installation

Accessing the switch for the first time

Connecting the micro USB console cable

Setting terminal parameters

Setting up an IRF fabric

Planning IRF fabric setup

Identifying IRF physical ports on the member switches

Planning the cabling scheme

Configuring basic IRF settings

Maintenance and troubleshooting

Concurrent RPS and AC inputs failure

Symptom

Garbled display on the configuration terminal

Appendix A Chassis views and technical specifications

S5130S-12TP-EI

S5130S-28P-EI/S5130S-28P-EI-M

S5130S-28TP-EI

S5130S-52TP-EI

S5130S-28S-EI/S5130S-28S-EI-M

S5130S-10P-HPWR-EI

S5130S-12TP-HPWR-EI

S5130S-28P-PWR-EI

S5130S-28P-HPWR-EI

S5130S-52P-PWR-EI

S5130S-28S-HPWR-EI

S5130S-52S-PWR-EI

S5130S-28F-EI

S5130S-52F-EI

Appendix B FRUs

Appendix C Ports and LEDs

SFP+ port

Combo interface

Power module status LED

SFP/SFP+ port LED

Index