H3C S6890 Switch SeriesIRF Configuration ExamplesDocument version: 6W100-20190628Copyright © 2019 New H3C Technologies Co., Ltd. All rights reserved.No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of NewH3C Technologies Co., Ltd.Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document arethe property of their respective owners.The information in this document is subject to change without notice.

H3C S6890 Series Configuration Examples

installation guide

documentation feedback

Preparing for installation

Cleanliness

Laser safety

Installing the switch

Installing the switch in a 19-inch rack

Rack-mounting procedures at a glance

Mounting brackets and grounding cable installation positions

Connecting the grounding cable to the chassis

Attaching the slide rails to the rack

Mounting the switch in the rack

Grounding the switch

Installing/removing fan trays

Removing a fan tray

Installing/removing power modules

Removing a power module

Connecting the power cords

Verifying the installation

Accessing the switch for the first time

Connecting the mini USB console cable

Setting terminal parameters

Setting up an IRF fabric

Planning IRF fabric setup

Identifying physical IRF ports on the member switches

Configuring basic IRF settings

Accessing the IRF fabric to verify the configuration

Maintenance and troubleshooting

Garbled display

Appendix A Chassis views and technical specifications

S6890-30HF

Technical specifications

Appendix B FRUs

Fan trays

Appendix C Ports and LEDs

USB port

QSFP28 port

LEDs

SFP+ port LED

Fan tray alarm LED

Appendix D Cooling system

Index

S6890 Series