H3C S7500E-XS Switch SeriesVXLANConfiguration GuideHangzhou H3C Technologies Co., Ltd.http://www.h3c.comSoftware version: S7500EXS-CMW710-R7178Document version: 6W100-20160118

H3C S7500E-XS Series Configuration Manual

obtaining documentation

technical support

Configuring EVB

Basic concepts

Protocols and standards

Configuring LLDP

Specifying a default VSI manager

Configuring an S-channel

Configuring an S-channel interface or S-channel aggregate interface

Configuring MAC address learning for an S-channel

Configuring VSI filters

Activating a VSI interface or VSI aggregate interface

Displaying and maintaining EVB

EVB configuration example

Index

S7500E-XS Series

installation guide

Preparing for installation

Temperature/humidity

Laser safety

Installing the switch

Installing the switch in a 19-inch rack

Rack-mounting procedures at a glance

Attaching the mounting brackets, chassis rails, and grounding cable to the chassis

Attaching the slide rails to the rack

Mounting the switch in the rack

Grounding the switch

Grounding the switch with a grounding strip

Grounding the switch by using the AC power cord

Installing a fan tray

Removing a fan tray

Installing/removing a power module

Installing a power module

Removing a power module

Connecting the power cord

Connecting the LSVM1DC650 power module

Verifying the installation

Accessing the switch for the first time

USB mini console cable

Setting terminal parameters

Powering on the switch

Setting up an IRF fabric

Planning IRF fabric setup

Planning IRF topology and connections

Identifying physical IRF ports on the member switches

Configuring basic IRF settings

Connecting the physical IRF ports

Maintenance and troubleshooting

Configuration terminal problems

Appendix A Chassis views and technical specifications

S7504E-XS

Technical specifications

Appendix B FRUs and compatibility matrixes

Fan trays

Appendix C Ports and LEDs

USB port

QSFP+ port

GBase-T autosensing Ethernet port

LEDs

QSFP+ port LED

GBase-T autosensing Ethernet port LEDs

Appendix D Cooling system

configuration guide

Bulk configuring interfaces

Displaying and maintaining bulk interface configuration

Configuring Ethernet interfaces

Configuring basic settings of an Ethernet interface

Configuring the link mode of an Ethernet interface

Configuring physical state change suppression on an Ethernet interface

Configuring generic flow control on an Ethernet interface

Configuring PFC on an Ethernet interface

Enabling EEE on an Ethernet interface

Forcibly bringing up a fiber port

Configuring a Layer 2 Ethernet interface

Configuring storm control on an Ethernet interface

Setting the MDIX mode of an Ethernet interface

Enabling bridging on an Ethernet interface

Displaying and maintaining an Ethernet interface

Configuring loopback, null, and inloopback interfaces

Configuring an inloopback interface