Operation Manual – Ethernet InterfaceH3C S9500 Series Routing Switches Table of ContentsiTable of ContentsChapter 1 Ethernet Interface Configuration ............................................................................... 1-11.1 Ethernet Interface Configuration........................................................................................ 1-11.1.1 Configuration Task List ........................................................................................... 1-11.1.2 Configuring LAN/WAN Mode for a 10GE Interface................................................. 1-11.1.3 Basic Ethernet Interface Configuration ................................................................... 1-31.1.4 Configuring Flow Control on an Ethernet Interface................................................. 1-41.1.5 Configuring Physical State Change Suppression on an Ethernet Interface ........... 1-51.1.6 Configuring Loopback Testing on an Ethernet Interface......................................... 1-51.1.7 Configuring a Manual Port Group ........................................................................... 1-61.1.8 Configuring Traffic Suppression for an Ethernet Interface...................................... 1-71.1.9 Setting the Interval for Collecting Ethernet Interface Statistics............................... 1-81.1.10 Setting the Maximum Jumbo Frame Size for Ethernet Interfaces ........................ 1-81.1.11 Configuring the MDI Mode of an Ethernet Interface ............................................. 1-91.1.12 Configuring the Source MAC Address for an Interface....................................... 1-101.2 Displaying and Maintaining Ethernet Interfaces .............................................................. 1-11