H3C S9810 Hardware Installation Quick Manual

Also see for S9810: Installation guide Manual

H3C S9810 Hardware Installation Quick Manual Manual pdf 1 page image

Installation accessories 安装附件介绍Before installation, wear an ESD wrist strap, and make sure the wrist strap makes goodskin contact and is reliably grounded.在以下安装交换机的过程中，操作者需佩戴防静电腕带，请确保防静电腕带已经正确接地并与皮肤良好接触。The installation tools are not provided with the switch. Prepare them yourself.交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。21Flathead screwdriver一字螺丝刀Phillips screwdriver十字螺丝刀Diagonal pliers斜口钳BOM: 3104A0E2Marker记号笔The installation accessories in the figure are for illustration only. Select installationaccessories as required. 交换机在不同的安装场景下，用户所需要的附件组合也有所差异。本图仅作示意，请用户以实际的安装场景为准，选择合适的附件组合进行安装。Grounding cable接地线Grounding screw接地螺钉Mounting brackets挂耳ESD wrist strap防静电腕带M6 screwM6 螺钉Cage nut浮动螺母Removable cable tie可拆卸式扎带M4 screwM4螺钉Adjustable cable managementbracket (optional)可调节式走线架(选配)Adjustable slide rails (optional)可伸缩式滑道（选配）The following figures illustrate the installation positions for the accessories. Determineinstallation positions for the accessories based on the installation requirements.以下图中给出了附件的安装位置，请根据安装场景的实际需求选择合适的安装位置。Mounting bracket installation position (two options) 安装挂耳，安装位二选一1Near the network ports安装在靠近端口侧Near the power modules安装在靠近电源侧2 Grounding cable installation position (two options) 安装接地线，安装位二选一Auxiliary grounding point安装在备用接地点Primary grounding point安装在主接地点The primary and auxiliary grounding points are on the chassis sides. Install the groundingcable before installing the switch in the rack. 交换机提供的主用接地点和备用接地点均位于机箱侧面，为了防止机箱安装到机柜后可能会无法安装接地线，因此请先将接地线安装到交换机的侧面接地点上。Attaching the accessories to the switch 安装附件到交换机Tool list 工具参考H3C S9810 Ethernet Switch Installation Quick Start-6PW104H3C S9810以太网交换机快速安装指南-6PW104 BOM:3104A0E2!!

/ 4

Related manuals for H3C S9810