H3C WX5540H Installation, Quick Start

H3C WX5540H Installation, Quick Start Manual pdf 1 page image

Installation accessories 安装附件介绍Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and isreliably grounded.操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良好接地。The installation tools are not provided with the access controller. Prepare them yourself.设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。Mounting the access controller on a workbench安装设备到工作台21Flathead screwdriver一字螺丝刀Phillips screwdriver十字螺丝刀Needle-nose pliers尖嘴钳Wire-stripping pliers剥线钳ESD wrist strap防静电腕带Diagonal pliers斜口钳Marker记号笔Cage nut(user-supplied)浮动螺母（用户自备）Grounding cable(provided)地线（标配）Removable cable tie(user-supplied)可拆卸式扎带（用户自备）M6 screw(user-supplied)M6 螺钉（用户自备）Front mounting bracket(provided)前挂耳（标配）Rear mounting bracket(provided)后挂耳（标配）M4 screw(provided)M4螺钉（标配） Airflow of the access controller 设备的风向设计H3C WX5540H Access Controller Installation Quick Start-6W103H3C WX5540H无线控制器快速安装指南-6W103 BOM: 3104A0FHTool list 工具参考Rubber feet(provided)脚垫贴（标配）Console cable(provided)配置电缆（标配）Make sure the workbench is stable and is reliablygrounded. Do not place heavy objects on the accesscontroller. Attach the rubber feet to the four roundholes in the chassis bottom. Place the accesscontroller on the workbench. 保证工作台的平稳与良好接地，并且不要在设备上放置重物。粘贴脚垫贴到设备底部，将带脚垫贴的设备平放到工作台上。Left-to-right airflow 设备采用左进右出的风道设计Make sure the air inlet and outlet vents are not blocked and the installation site has a goodventilation system.请确保设备的进、出风孔不被遮挡，并将设备安装在具有良好通风散热系统的环境中。!Heat gun热风枪

/ 4

Related manuals for H3C 6W103