Haas ATT-4 Installation And Alignment Manual

Haas ATT-4 Installation And Alignment Manual Manual pdf 1 page image

LAST UPDATED: 02/18/2019TL-1/2 - ATT-4/8 Turret - Installation and AlignmentAD0304Applies to machines built September 2014 and afterIntroductionThis procedure tells you how to install a ATT-4/8turret on a TL-1 or TL-2 lathe.Software Requirements:• Classic Haas Control (CHC) - Softwareversion 11.24A or higher.• Next Generation Control (NGC) -Software 100.17.000.2040 or higher.Tools Required• 0.0005" Dial Indicator with MagneticBase• Service USB key (NGC only)Document Applies to these kits:• 93-2228 TL-1/2 ATT4 Standard - CHC• 93-2229 TL-1/2 ATT4 Metric - CHC• 93-3833 TL-1/2 ATT4 Standard - NGC• 93-3834 TL-1/2 ATT4 Metric - NGC• 93-2899 TL-1/2 ATT8 Standard - NGC• 93-2898 TL-1/2 ATT8 Standard - NGCTL-1/2 - ATT-4/8 Turret - Installation and Alignment - AD0304Page 1 of 10 pages