ST, DS - Alignment Correction - IntroductionCorrect lathe alignment makes a common centerline through the spindle [1], the turret pocket [2], and the tailstock [3] orsecondary spindle. If the turret crashes, the lathe can lose its alignment. This procedure tells you how to correct the lathealignment. For clarity, the illustrations hide surrounding components.PrerequisitesMake sure the machine is level. Refer to the Lathe Leveling Video.Haas Technical DocumentationST, DS - Alignment Correction Scan code to getthe latest versionof this documentTranslationAvailableApplies to machines built from:June, 2010Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction | Last Published On November 05, 2015 1/67

Haas Automation ST Manual