100 Springdale Rd, A3-206, Cherry-Hill, NJ 08003, USA www.Haldor-Tech.comHScanner™ Quick GuideH-Scanner is a wired handheld reader with a capability to support barcode andRFID.Quick start:1. Connect the H-Scanner to the PC via USB connector [1]2. After the H-Scanner is connected to a PC, a single beep sound is toconfirm the connection. (only at the first time).3. The big BLUE button [2] triggers the scanning: Scan of a Barcode label– Red laser beam is to appear to assist capturingthe barcode. A single beep sound and single green led blink is to indicatereading Scan of an RFID tag – A double beep sound and a double green led blinkis to indicate reading a tagCare of use: Improve speed of scan by placing the front panel [3] in distance of:o For Barcode – up to 20cmo For RFID – up to 3cm Verify that every scanning event is registered on screen (UI) Clean the device with Sterile Saline Wipers.X Avoid exposure to fluids.X Do not scan (RFID or Barcode) if there is Antenna Error message on the UI.X Lift the device by holding it at the handle (Do not pull by the cable).312

Haldor ORLocate H-Scanner Quick Manual