97097C (Rev. J - 1/08)HRF - E*B HRF - S*B HRF - EBP*B HRF - SBP*B HRF - SEBP*BHalsey Taylor Owners ManualNon-Refrigerated Fountains with or without Back PanelTo assure you install this model easily and correctly,PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THEINSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITHPLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leavethese instructions inside the fountain for future reference.IMPORTANT! INSTALLER PLEASE NOTE.THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TOWATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAYOCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACKINTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR ANINCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USINGTHE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLERSHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDINGPLUMBING SYSTEM.IMPORTANTALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSONTUBE ISSECUREDIN POSITIONSIMPLY PUSH INTUBE TO ATTACHPUSH IN COLLETTO RELEASE TUBEPUSHING TUBE IN BEFOREPULLING IT OUT HELPS TORELEASE TUBEFIG. 2OPERATION OF QUICK CONNECT FITTINGSFIG. 1InstallerNOTE: WATER FLOWDIRECTIONBUILDING WATER INLETSERVICE STOP(NOT FURNISHED)1/4" O.D. TUBEWATER INLETTO COOLER3/8" O.D. UNPLATEDCOPPER TUBE CONNECTCOLD WATER SUPPLY